Enjoy free NZ Standard shipping when you spend over $150

Benefits of a Purge Snorkel for Scuba Divers

Benefits of a Purge Snorkel for Scuba Divers

, by Admin, 7 min reading time

Understand the benefits of a purge snorkel for clearer surface breathing, quicker drainage and more comfort when choosing scuba gear in Australian waters.

A snorkel can look like a minor part of a dive kit, but it has a real job to do at the surface. The benefits of a purge snorkel are most noticeable when there is chop, spray, a longer surface swim or repeated duck-dives between looking below and breathing above the water. A well-designed purge valve helps clear water with less effort, so you can focus on your position, your surroundings and your buddy rather than constantly managing a flooded tube.

For recreational scuba divers and spearfishers, the right snorkel is not about buying the most complicated model. It is about choosing a dependable design that fits your mask comfortably and works predictably in the conditions you actually use it in.

What a purge snorkel actually does

A purge snorkel has a one-way valve near the bottom of the tube, usually in a small reservoir or sump below the mouthpiece. When water enters the snorkel, it naturally collects at this low point. A firm exhale pushes the water through the valve rather than forcing all of it up and out of the open top.

Traditional open snorkels can be cleared effectively, and many experienced divers prefer their uncomplicated design. The difference is effort. With a purge valve, clearing a small amount of water after a wave or surface dip generally takes a shorter, more controlled breath. That can make the snorkel feel less demanding over a long day on the water.

The valve does not make a snorkel waterproof, and it does not eliminate the need to clear water properly. Its role is to make routine clearing easier when the snorkel has taken on water.

Benefits of a purge snorkel in real conditions

Faster clearing after chop and spray

Australian coastal conditions can change quickly. Even on a calm day, boat wake, wind chop and a passing wave can send water into an open snorkel. A purge valve gives that water a dedicated exit at the bottom of the snorkel.

Instead of needing a large, forceful blast to clear the full length of the tube, you can usually clear the collected water with a controlled exhale. This is particularly useful when surface-swimming back to shore, moving around a reef edge or waiting in the water before a descent.

More comfortable surface breathing

A snorkel is often used during the parts of a dive that receive the least attention: swimming out, returning to the boat, checking the water below or resting at the surface. Small annoyances become more obvious when they are repeated. Water sitting in the mouthpiece, an awkward bite tab or a tube that pulls against the mask strap can make a simple surface swim feel needlessly tiring.

A purge snorkel reduces one of those annoyances. Because water drains from the bottom section more readily, there is less chance of each breath starting with an unwanted mouthful of water. For newer scuba divers, this can make surface breathing feel more settled. For experienced divers, it is simply a practical convenience.

Less effort after duck-diving

Divers and spearfishers frequently move between the surface and shallow water. When the snorkel goes below, water enters through the top. On returning to the surface, the snorkel needs to be cleared before normal breathing resumes.

The lower purge valve helps remove water from the sump first, which can reduce the force needed for the initial clearing breath. It is a useful feature for anyone doing repeated shallow descents, particularly in conditions where water keeps finding its way back into the tube.

A splash guard at the top can add another layer of comfort by reducing the amount of spray entering in the first place. These are separate features, but they work well together: the top helps limit water entry, while the lower valve helps deal with water that gets in.

A more relaxed rhythm at the surface

Good diving gear should remove distractions rather than create them. If you are repeatedly clearing a snorkel, adjusting the mouthpiece or dealing with a poor-fitting tube, your attention is drawn away from conditions, boat traffic and your diving partner.

A purge snorkel will not transform rough water into calm water, but it can make surface time more manageable. The benefit is often subtle: fewer hard clears, fewer interruptions and less frustration over the course of a day. That is why many divers choose a purge model even when they can clear a standard snorkel without trouble.

Useful for divers who prefer a softer clear

Not everyone wants to use a strong blast of air to clear a snorkel. Some people simply find a gentler, more progressive exhale more comfortable. Because a purge valve releases water from the lowest part of the tube, it can suit divers who want an easier clearing action without relying on one powerful breath.

This does depend on the valve design. A quality valve should open easily when you exhale, then seal properly so water does not creep back through the bottom. Cheap valves can feel stiff, leak or become unreliable after exposure to sand and salt. The feature is only worthwhile when the snorkel itself is well made.

When a purge snorkel may not be the best choice

Purge snorkels have clear advantages, but they are not automatically the right option for every diver. The purge assembly adds parts, which means more places for salt, sand or debris to collect. It also makes the lower section slightly bulkier than a basic J-shaped snorkel.

Divers who value the simplest possible setup may prefer an open-top snorkel with no valve. It has fewer components, is easy to inspect and can be very reliable when looked after. Some also prefer the lighter feel and lower profile of a basic model, especially if the snorkel is carried primarily as a backup.

There is also a fit consideration. A large purge chamber may sit close to the chin or interfere with comfort depending on your face shape and regulator configuration. Before choosing, look at the mouthpiece angle, tube flexibility and how the snorkel attaches to your mask strap. A useful purge valve cannot make up for a snorkel that twists, tugs or sits poorly in your mouth.

Choosing a purge snorkel that suits your kit

Start with the mouthpiece. It should be comfortable enough to use for extended surface swimming without creating jaw fatigue. Soft silicone is generally preferable to hard plastic, and a replaceable mouthpiece can be a worthwhile feature for regular use.

Next, consider the tube. A flexible lower section can make it easier to position the snorkel beside your head and reduce strain if it catches on something. A semi-dry top or splash guard is useful in choppy conditions, although a more complex top can add bulk and resistance. If you mainly dive in sheltered bays, a straightforward open top with a reliable purge valve may be all you need.

Check the mask attachment as well. It should hold the snorkel securely without damaging the mask strap or making adjustment difficult. A quick-release clip is convenient if you regularly remove the snorkel, but it should not be so loose that the snorkel shifts when you turn your head.

Finally, match the snorkel to your usual diving. A compact, folding model can suit divers who want to stow it in a BCD pocket. A full-size purge snorkel is often the more comfortable choice for regular surface use. Spearfishers and shallow-water users may prioritise a streamlined tube and a quiet, natural feel, while boat divers may place more value on easy clearing in swell.

Care keeps the valve working properly

A purge valve needs only basic attention, but it should not be ignored. Rinse the snorkel thoroughly in fresh water after use, paying particular attention to the valve housing and mouthpiece. Let it dry fully before storage, and avoid leaving it crushed beneath heavier gear in a gear bag.

Before heading out, inspect the valve for grit, tears, stiffness or distortion. If the diaphragm is damaged or does not sit flat, it may allow water into the mouthpiece from below. Many quality snorkels have replaceable valve parts, which is more practical than replacing an otherwise sound snorkel.

A purge snorkel is a small upgrade that earns its place through everyday comfort rather than novelty. Choose one that fits your mask, suits your usual conditions and uses quality silicone components, and surface time will feel that bit more controlled when the water gets lively.

Leave a comment

Leave a comment


Other Blog Posts

© 2026 NZ Diver , Powered by Shopify

    • American Express
    • Apple Pay
    • Bancontact
    • Google Pay
    • iDEAL Wero
    • Mastercard
    • PayPal
    • Shop Pay
    • Union Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account